You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This is a C-tab stainless steel tandem roller with two 1-1/4 in. concave or grooved stainless steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The... ... more | FREE shipping go to store |
 | PRIME-LINE B 702 1 in. Steel Screen Door Roller (2 Pack) Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This steel housing and... ... more
PRIME-LINE B 702 1 in. Steel Screen Door Roller (2 Pack) Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This steel housing and... | go to store |
| Best Seller  | PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... ... more
PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... | go to store |
 | PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... ... more
PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... | go to store |
 | This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
 | S608ZZ Stainless Steel Ball Bearing 8x22x7mm Double Shielded S608Z Bearings 5pcs - 5 Pack NOTE£º Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. ... more | FREE shipping go to store |
 | Wardrobe Door Stainless Steel Double Ball Roller Catch Latch Silver Tone 5pcs - Silver Tone 5pcs Easy installation. Features 54mm total length, double ball, could be installed on cabinet, cupboard, drawer, door, etc. Made of stainless steel material in silver tone Dimension: 54 x 18 x 15mm / 2.13" x 0.71" x 0.59" (L*W*H) Screws Not Included. ... more | FREE shipping go to store |
 | Cabinet Door Stainless Steel Ball Rollers Catches 50x19x10mm 4pcs - Silver Tone Main Color: Silver Tone; Net Weight: 46g Package Content: 4pcs x Door Ball Catch; Product Name: Door Ball Catch Material: Stainless Steel Dimension: 50 x 19 x 10mm/2" x 0.7" x 0.4"(L*W*H) Mounting Hole Size: 8x3mm/0.32''x0.12''(L*W), 7x3mm/0.28''x0.12''(… ... more | FREE shipping go to store |
 | PRIMELINE TOOLS N 6662 Top Mount Pocket Door Roller Mounting Bracket (Single This is a top, center mounted pocket door bracket. Usually used with the Acme 4-wheeled assembly. It made of steel with a 5/16-18 threaded rod attached. A locking nut and T-nut are attached to the threaded rod that the Prime-Line part N 6659 slips... ... more
PRIMELINE TOOLS N 6662 Top Mount Pocket Door Roller Mounting Bracket (Single This is a top, center mounted pocket door bracket. Usually used with the Acme 4-wheeled assembly. It made of steel with a 5/16-18 threaded rod attached. A locking nut and T-nut are attached to the threaded rod that the Prime-Line part N 6659 slips... | go to store |
 | Door Stainless Steel Double Ball Roller Catch Latch Silver Tone - Silver Tone 1pcs Easy installation. Features 54mm total length, double ball, could be installed on cabinet, cupboard, drawer, door, etc. Made of stainless steel material in silver tone Dimension: 54 x 18 x 15mm / 2.13" x 0.71" x 0.59" (L*W*H) Screws Not Included. ... more | FREE shipping go to store |
 | This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
 | This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
 | This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
 | These patio door and screen door rollers are constructed of a stainless steel wheel and stainless steel ball bearings. These replacement wheels have a concave (center grooved) edge and are for use over raised-edge, sliding door tracks. This type of... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
 | This is a plain back tandem plain back roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by Keller as well as a variety of other manufacturers, primarily on vinyl patio... ... more | go to store |
 | This is a U-back, patio door roller assembly with a flat 1-1/2 in. ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or bolt is... ... more | go to store |
 | This is a plain back tandem roller assembly used by Armour Vue, Atlas and a variety of sliding patio door manufacturers. It has in-line tandem inner housing with two 1-1/2 in. concave steel ball bearing rollers set in a stamped steel housing with rear... ... more | go to store |
 | This is a B-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/16 in. tall with a flare width of 13/16 in.. The B- tab secures the assembly as the mounting screw is driven up through the B-tab hole and into the... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This is an extra heavy-duty plain back, tandem roller assembly used by Kawneer on their heavy doors. Often found in Hawaii used on door walls, it has an in-line tandem inner housing with 1-1/2 in. concave or grooved steel ball bearing rollers set in a... ... more | go to store |
 | This is a unique tandem roller assembly with two 1-1/4 in. concave steel ball-bearing rollers installed. The square-shaped housing is 11/16 in. wide, 1-1/2 in. tall, and 4-1/2 in. long. It has an end adjustment screw and two mounting tabs at each end... ... more | go to store |
 | This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
 | This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
 | This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more | go to store |
 | This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
 | This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers. The stamped steel housing is adjustable and used by Milgard as well as a variety of other manufacturers. Primarily used on vinyl patio doors. The housing... ... more | go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... ... more | go to store |
 | Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This aluminum housing with... ... more | go to store |
 | This is a plain back tandem wheel roller assembly that is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 5/16 in. roller... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and 1... ... more | go to store |
 | These shower door rollers are constructed of durable plastic and include a threaded hex hub manufactured into each wheel. Wheels like these are used to replace missing or damaged wheels on shower door roller assemblies and the like. These rollers... ... more | go to store |
 | This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
Ads related to Prime-Line 1-1/4 in. Tandem Stainless Steel Roller Assembly w/ Ball Bearing Rollers Single Pack in Brown | 9.44 H x 3.82 W x 0.63 D in | Wayfair
