Power Tools › Irwin › router bit

Irwin 3/4 X 17 Long Ship Auger Bit Wood 47412 Irwin Boring Bits 47412

AUGR BIT 3/4 more

IRWIN 39104 - 1/4 Installer Tri-Flats Shank Fractional Drill Bit

IRWIN 39104 - 1/4 Installer Tri-Flats Shank Fractional Drill Bit more

Irwin 39112 Installer Drill Bit 3/4

IRWIN INSTALLER DRILL BITIrwin Power Drill Installer Bit measures 18 inches long and 3/4-inch diameter for installing all types of small wire in homes offices garages etc. A small hole in the f more

Hanson BIT DRI 5/16 TURBOMAX CARDED

Features and Benefits: Self centering tip for clean fast starts Jet Point® tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute... more

IRWIN 88807 - 7/16 Speedbor 1/4 Hex Shank Spade Bit

IRWIN 88807 - 7/16 Speedbor 1/4 Hex Shank Spade Bit more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

IRWIN INDUSTRIAL Tool 12411 1/2 High Speed Steel Countersink Bit

Precision ground 82-degree tip for countersinking most machineable metals wood or plastic. Made from industrial grade High-Speed Steel for increased durability. Black oxide finish resists corrosion. Five-flute design reduces vibration for smoother... more

Irwin 326011 Percussion Masonry Drill Bit 3/8

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin 3/8 in. X 6 in. L High Speed Steel Percussion Drill Bit 1 pc

IRWIN Rotary Percussion Bits has patented flute geometry to remove dust from the hole quicker for fast drilling and long life more

Stanley Products Auger Bits with WeldTec 5/8 in X 17 in - 1 EA (585-3043007)

The IRWIN WeldTec 5/8-inch Auger Bit features a hard cutting edge that is welded to the base material for improved strength and durability. The welded cutting edge on each WeldTec auger drill bit provides an extended cutting life. Wide flutes and a... more

IRWIN 314015 - 15-Piece Black Oxide HSS Straight Shank Fractional Drill Bit Pro Set

IRWIN 314015 - 15-Piece Black Oxide HSS Straight Shank Fractional Drill Bit Pro Set more

IRWIN 49908 - 1/2 I-100 Series Solid Center Auger Bit with Cutting Spur

IRWIN 49908 - 1/2 I-100 Series Solid Center Auger Bit with Cutting Spur more

Irwin Industrial Tool Co 67528 7/16 Black Oxide 135 Degree Drill Bit Carded

Irwin Tools 67528 Heavy Duty HSS Drill Bits - 7/16 Black Oxide Fractional Drill Bit The item is Heavy Duty HSS Drill Bits - 7/16 black oxide fractional drill bit Used for Power Tool Accessories Drill Bits & Accessories The product is manufactured in... more

Irwin 3041002 Speedbor Max 5/8-Inch by 6-Inch Self Feeding Spade Bit

Irwin 3041002 Speedbor Max 5/8-Inch by 6-Inch Self Feeding Spade Bit Amazon.com The Irwin Speedbor 5/8-by-6-Inch Max Spade Bit is a fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection. The Speedbor MAX has cutting spurs... more

Irwin 3041002 Speedbor Max Speed Bit ~ 5/8

SPEEDBOR MAX SPADE BIT1/4 hex shank size with 6 shank lengthTri-flute design for faster chip ejectionCutting spurs have 3 cutting edgesFull screw tip allows bit to self feedGrooved hex shank prevents slipping in drillFits all standard 1/4 quick change... more

IRWIN 3041002 Woodboring Bit, 5/8 x 6 IN

Speedbor, Hybrid Drill Bit, 5/8 in, 2 in Flute Length, 6 in Overall Length, Shank Diameter 1/4 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin 49916 1-Inch by 7-1/2-Inch Solid Center Auger Bit

Power Drill I-100 Auger Bits 1 in x 7 1/2 in Irwin Power Drill I-100 Auger Bits WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer... more

IRWIN 49916 Auger Bits, 1in Bit Size, Length 7.5in

Spur Auger, Auger Bits, 1 in, 7 1/2 in Overall Length, Hex, Bright (Uncoated), Shank Diameter 1 in, Shank Hex Size 5/16 in, Maximum Drilling Depth 4 1/2 in more

Hanson 12 BIT EXTENSION

Features and Benefits: Available in 6 and 12 lengths Not for use with quick change woodboring bits Adds 12 inches to regular bit length and follows 5/8 or larger bit through the hole Forged of high quality tool steel and made in heavy-duty double set... more

Hanson BIT DRI 7/64 TURBOMAX CARDED 2 PCK

Features and Benefits: Self centering tip for clean fast starts Jet Pointr tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute Three... more

IRWIN 91147 - 47/64 S&D HSS 1/2 Reduced Shank Fractional Drill Bit

IRWIN 91147 - 47/64 S&D HSS 1/2 Reduced Shank Fractional Drill Bit more

IRWIN 60509 - 9/64 General Purpose HSS Straight Shank Fractional Drill Bit

IRWIN 60509 - 9/64 General Purpose HSS Straight Shank Fractional Drill Bit more

Irwin Speedhammer Plus 3/4 in. Dia. x 12 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin WeldTec 3/4 in. Dia. x 17 in. L Auger Bit 7/16 in. Quick-Change Hex Shank 1 pc.

The Irwin with WeldTec ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard... more

Irwin 3043009 Weldtec Ship Auger 3/4 X 17

3/4 x 17 ; 7/16 quick change impact shank; Full forged body on bits 3/4 diameter and larger; Weldtec ship auger bits are made stronger and last longer; Harder cutting edge is welded to the base material; 2 times nail cutting life compared to standard... more

IRWIN 3043009 Ship Auger Bit,3/4 Dia,7/16 Hex Shank

Ship Auger, Auger Drill Bit, 3/4 in, 17 in Overall Length, Hex, PTFE, Shank Hex Size 7/16 in more

Irwin 3041005 Speedbor Max 7/8-Inch by 6-Inch Self Feeding Spade Bit

The IRWIN SPEEDBOR MAX Speed Standard-Length Drill Bit utilizes a tapered tri-flute design that allows for faster chip ejection and less binding. The drill bits have cutting spurs with 3 cutting edges for added durability and also feature a full screw... more

Irwin 3041005 7/8 Speedbor Max Bit

SPEEDBOR MAX SPADE BIT1/4 hex shank size with 6 shank lengthTri-flute design for faster chip ejectionCutting spurs have 3 cutting edgesFull screw tip allows bit to self feedGrooved hex shank prevents slipping in drillFits all standard 1/4 quick change... more

Irwin 3041005 Speedbor Max Wood Boring Bit 7/8 x6

Cutting spurs have 3 cutting edges for added durability. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4 quick change chucks. more

IRWIN 3041005 Woodboring Bit, 7/8 x 6 IN

Speedbor, Hybrid Drill Bit, 7/8 in, 2 5/8 in Flute Length, 6 in Overall Length, Shank Diameter 1/4 in, Carbon Steel, Maximum Drilling Depth 4 in, Bright (Uncoated) more

Irwin WeldTec 7/8 in. Dia. x 17 in. L Auger Bit 7/16 in. Quick-Change Hex Shank 1 pc.

The Irwin with WeldTec ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard... more

Irwin 3/4 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 1 pc.

IRWIN Auger Bit is for fast rough or clean and exact holes. Irwin s extensive line of woodboring drill bits provide the user with the best available tools for each application in achieving their drilling needs. more

IRWIN 49912 Auger Bits

Spur Auger, Auger Bits, 3/4 in, 7 1/2 in Overall Length, Hex, Bright (Uncoated), Shank Diameter 3/4 in, Shank Hex Size 5/16 in, Maximum Drilling Depth 4 1/2 in more

Irwin 15/16 in. Dia. x 7.5 in. L Auger Bit Carbon Steel 5/16 in. Hex Shank 1 pc.

Solid center design provides extra rigidity while boring. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a... more

IRWIN 49909 - 9/16 I-100 Series Solid Center Auger Bit with Cutting Spur

IRWIN 49909 - 9/16 I-100 Series Solid Center Auger Bit with Cutting Spur more

Hanson BIT DRI 3/32 TURBOMAX CARDED 2 PCK

Features and Benefits: Revolutionary tip design stays sharper longer and drills up to 10 times faster than other leading drill bits High speed steel features a black body and gold flute Self-centering Turbomax tip for clean entry and fast starts; stays... more

Irwin 322024 3/8 Sds Hammer Bit

SDS-PLUS HAMMER DRILL BITSFit SDS-plus & Hilti TE-C rotary hammersChrome vanadium spring steel shaftPatented tip & flute designCarbide tip made to ANSI specificationsSDS-plus shank 2-cutter headSDS-plus packagingLength listed is twist length total... more