Home Hardware › Hinges › brass accents 3 x 12

Drop Leaf Table Hinges - Small - Antique Drop Leaf Table Hinges Made From Antique Originals - 2-15/16 Longx1-1/4 Wide - Comes With 2 Hinges & 12 Wood Screws Grey

Made From Heavy Rolled Steel They Are 1/16 Thick For Lasting Durability Made From Heavy Steel Unlike Cheaper Stamped Hinges 2 Hinges Plus 12 #6 x 3/4 Flathead Wood Screws for Installation. Excellent Antique Reproduction Of Original Dimensions:2-15/16 L... more

11 PCS Satin Nickel Steel Door Hinge 2.75 x 1.5 Rounded Edge Corner 17139 SN

East West Consolidated 61968 3.5 Square Edge SN Satin Nickel Steel Door Hinge (Pack of 12) more

Whitecap Boat Butt Hinge S-3422R | Reversed 2 x 2 Inch Stainless

Boat part number 1101082 is a new reversed butt hinge from Whitecap part number S-3422R . This hinge is constructed out of 12 gauge stainless steel with a polished finish on the reverse side. Mounts with (4) 3/16 Dia. countersunk holes set apart 1 3/8... more

Boat 20 Gauge Offset Hinge | 8 x 1 Inch Stainless Steel (Pair)

Boat part number 1056676 is a new pair of 20 gauge hinges manufacturer and part number unavailable. These hinges are constructed out of stainless steel and measure approximately 1 W x 8 H x 1/2 D overall when opened. Mounts with (3) 1/8 dia. holes set... more

80/20 2085 1 1/2 in W x 3 in H Anodized Aluminum Door and Butt Hinge

Butt Hinge, Aluminum, Anodized Aluminum Finish, 30 lb Load Capacity, 2 Holes per Leaf, No Ligature Resistant, 160 Degrees Range of Motion, Orientation Non Handed, 3 in Door Leaf Height, 3 in Frame Leaf Height, 1 1/2 in Door Leaf Width, 1 1/2 in Frame... more

ZORO SELECT 4PB18 3/4 in W x 72 in H Bright Brass Continuous Hinge

Continuous Hinge, Ligature Resistant No, Steel Material, 180 Degrees Range of Motion, Bright Brass Finish, With Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 72 in Door Leaf Height, 72 in Frame Leaf Height, 3/4 in Door Leaf Width, 3/4... more

ZORO SELECT 4PA91 1 3/4 in W x 3 1/2 in H Satin Chrome Spring Hinge

Spring Hinge, Steel Material, Satin Chrome Finish, With Holes, 3 Holes per Leaf, No Ligature Resistant, 270 Degrees Range of Motion, Orientation Non Handed, 3 1/2 in Door Leaf Height, 3 1/2 in Frame Leaf Height, 1 3/4 in Door Leaf Width, 1 3/4 in Frame... more

MCKINNEY 3 1/2 T2895 US4 1/4RC NL 3 1/2 in W x Satin Brass Swing Clear Hinge

Swing Clear Hinge, Ligature Resistant No, Mounting Flush, Bearing Type Plain, Pin Type Barrel, Finish Satin Brass, Height 3 1/2 in, Width 3 1/2 in, Leaf Thickness 0.087 in, Pin Dia. 0.5 in, Holes per Leaf 3, Corners Radius 1-1/4 in, Material Steel,... more

MCKINNEY 55314 3 1/2 in W x Satin Nickel Five Knuckle Hinge

Five Knuckle Hinge, Ligature Resistant No, Mounting Flush, Bearing Type Plain, Pin Type Barrel, Finish Satin Nickel, Height 3 1/2 in, Width 3 1/2 in, Leaf Thickness 0.123 in, Pin Dia. 0.5 in, Holes per Leaf 3, Corners Square, Material Steel, Load... more

SOSS 208US4 5/8" W x 2-3/4" H Satin Brass Concealed Hinge

Concealed Hinge, Zamac/Steel Material, Satin Brass Finish, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 2 3/4 in Door Leaf Height, 2 3/4 in Frame Leaf Height, 5/8 in Door Leaf Width, 5/8 in... more

ZORO SELECT 4PA23 3 1/2 in W x 4 1/2 in H Gray Prime Coat Door and Butt Hinge

Butt Hinge, Steel, Gray Prime Coat Finish, With Holes, 3 and 4 Holes per Leaf, No Ligature Resistant, Orientation Non Handed, 4 1/2 in Door Leaf Height, 4 1/2 in Frame Leaf Height, 3 1/2 in Door Leaf Width, 11/16 in Frame Leaf Width, 0.14 in Door Leaf... more

ZORO SELECT 2ZFJ6 3/4 in W x 36 in H Stainless steel Continuous Hinge

Continuous Hinge, Ligature Resistant No, Stainless Steel Material, 270 Degrees Range of Motion, Stainless Steel Finish, Without Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 36 in Door Leaf Height, 36 in Frame Leaf Height, 3/4 in Door... more

ZORO SELECT 4PB20 3/4 in W x 48 in H Bright Nickel Continuous Hinge

Continuous Hinge, Ligature Resistant No, Steel Material, 180 Degrees Range of Motion, Bright Nickel Finish, With Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 48 in Door Leaf Height, 48 in Frame Leaf Height, 3/4 in Door Leaf Width, 3/4... more

ZORO SELECT 4PB34 3/4 in W x 72 in H Steel Continuous Hinge

Continuous Hinge, Ligature Resistant No, Steel Material, 180 Degrees Range of Motion, Steel Finish, Without Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 72 in Door Leaf Height, 72 in Frame Leaf Height, 3/4 in Door Leaf Width, 3/4 in... more

ZORO SELECT 1JER2 3/4 in W x 72 in H Dull Aluminum Continuous Hinge

Continuous Hinge, Ligature Resistant No, Aluminum Material, 180 Degrees Range of Motion, Dull Aluminum Finish, Without Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 72 in Door Leaf Height, 72 in Frame Leaf Height, 3/4 in Door Leaf... more

ZORO SELECT 4PA98 3/4 in W x 72 in H Steel Continuous Hinge

Continuous Hinge, Ligature Resistant No, Steel Material, 180 Degrees Range of Motion, Steel Finish, With Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 72 in Door Leaf Height, 72 in Frame Leaf Height, 3/4 in Door Leaf Width, 3/4 in Frame... more

ZORO SELECT 4PB10 3/4 in W x 72 in H Bright Nickel Continuous Hinge

Continuous Hinge, Ligature Resistant No, Steel Material, 180 Degrees Range of Motion, Bright Nickel Finish, With Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 72 in Door Leaf Height, 72 in Frame Leaf Height, 3/4 in Door Leaf Width, 3/4... more

Deltana 4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge

4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge

4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge

4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge

4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge

4-3/8" x 5/8" x 3/8" Solid Brass Pivot Hinge Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Design House 6-Hole 3 1/2" x 3 1/2" 5/8" Radius Door Hinge 3-Pack Oil Rubbed Bronze

The Design House 181438 3-Pack Hinge 3.5 inches in Oil-Rubbed Bronze has a 5/8 inches radius corner for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. more

BEST CB191 3 5X3 5 FM SW DOOR HINGE 32D STS 1 1/2 in W x 3 1/2 in H Satin Door

Butt Hinge, Stainless Steel, Satin Stainless Steel Finish, 75 lb Load Capacity, With Holes, 3 Holes per Leaf, No Ligature Resistant, 270 Degrees Range of Motion, Orientation Non Handed, 3 1/2 in Door Leaf Height, 3 1/2 in Frame Leaf Height, 1 1/2 in... more

Design House 181404 6-Hole 3.5-inch x 3.5-inch 5/8-inch Radius Door Hinge Satin Brass 10-Pack

The Design House 181404 10-Pack Hinge 3.5 inches in Satin Brass has a 5/8 inch radius corner for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. more

Baldwin 3" x 3" Solid Brass Square Corner Plain Bearing Mortise Hinge

Mortise Hinge Collection Baldwin Square Corner 3" x 3" Solid metal Plain Bearing Mortise Hinge - Single Hinge Baldwin's top of the line hinges set industry standards for excellence. more

Baldwin 3" x 3" Solid Brass Square Corner Plain Bearing Mortise Hinge

Mortise Hinge Collection Baldwin Square Corner 3" x 3" Solid metal Plain Bearing Mortise Hinge - Single Hinge Baldwin's top of the line hinges set industry standards for excellence. more

Design House 181347 6-Hole 3.5-inch x 3.5-inch 1/4-inch Radius Door Hinge Satin Brass 10-Pack

The Design House 181347 10-Pack Hinge 3.5" in Satin Brass has a 1/4" radius corner, for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. Each hinge has 6 holes and measures 3-1/2" x 3-1/2" x 7/16". more

Baldwin 3" x 3" Solid Brass Square Corner Plain Bearing Mortise Hinge

Mortise Hinge Collection Baldwin Square Corner 3" x 3" Solid metal Plain Bearing Mortise Hinge - Single Hinge Baldwin's top of the line hinges set industry standards for excellence. more

Baldwin 3" x 3" Solid Brass Square Corner Plain Bearing Mortise Hinge

Mortise Hinge Collection Baldwin Square Corner 3" x 3" Solid metal Plain Bearing Mortise Hinge - Single Hinge Baldwin's top of the line hinges set industry standards for excellence. more

Solid Brass Door or Cabinet Hinge Spire Tip 3 1/2" Renovators Supply - N/A

This set of beautiful brass hinges from Renovator's Supply are durable and practical without sacrifing that beautiful brass shine. Our proprietary RSF finish protects from scratches and tarnishing for a long full life. more

Deltana 3-7/8" x 5/8" x 1/4" Solid Brass Pivot Hinge Set

3-7/8" x 5/8" x 1/4" Solid Brass Pivot Hinge Set Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 3-7/8" x 5/8" x 1/4" Solid Brass Pivot Hinge Set

3-7/8" x 5/8" x 1/4" Solid Brass Pivot Hinge Set Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 3-7/8" x 5/8" x 1/4" Solid Brass Pivot Hinge Set

3-7/8" x 5/8" x 1/4" Solid Brass Pivot Hinge Set Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 4-3/8" x 5/8" x 1-7/8" Solid Brass Pivot Hinge

4-3/8" x 5/8" x 1-7/8" Solid Brass Pivot Hinge Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. more

Deltana 3 1/2 x 3 1/2 Ball Bearing 1/4" Radius Corner Spring Hinge -

Features: Includes One (1) hinge in each order Constructed from steel for long lasting durability Self closing function closes the door, preventing it from staying open when not in use Mounting hardware included for quick and easy installation Deltana… more

Design House 181578 8-Hole 4-inch x 4-inch 5/8-inch Radius Door Hinge Satin Brass 3-Pack

The Design House 181578 3-Pack Hinge 4" in Satin Brass has a 5/8" radius corner, for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. Each hinge has 8 holes and measures 4" x 4" x 1/2". more

Design House 181511 8-Hole 4-inch x 4-inch 1/4-inch Radius Door Hinge Satin Brass 3-Pack

The Design House 181511 3-Pack Hinge 4" in Satin Brass has a 1/4" radius corner, for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. Each hinge has 8 holes and measures 4" x 4" x 1/2". more