Home Hardware › Zinc › 32 50 in universal flat

#8-32 x 2 (FT) Coarse Thread Machine Screw Phillips Flat Head Low Carbon Steel Zinc Plated Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-108749 Fastener Type: Machine Screw Phillips Flat Head Size Description: #8-32 x 2 (FT) Diameter/Nominal Size: #8 Length: 2 Thread Pitch: 32 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Full... more

8_ -32 Nylon Insert Hex Lock Nuts, Carbon Steel White Zinc 50 Pcs - Silver Tone (50 Pcs) - 8#-32

[SIZE]: Width Measured From Flat to Flat 9mm / 0.35"; Height 6mm / 0.24". [MATERIAL]: Made of carbon steel, surface is Zinc-plated for good rust resistance. more

6_ -32 Nylon Insert Hex Lock Nuts, Carbon Steel White Zinc 50 Pcs - Silver Tone (50 Pcs) - 6#-32

[SIZE]: Width Measured From Flat to Flat 8mm / 0.31"; Height 4mm / 0.16". [MATERIAL]: Made of carbon steel, surface is Zinc-plated for good rust resistance. more

#6-32 Rivet Nuts 50 Pack Zinc Plated Carbon Steel Knurled Flat Head Threaded Insert Nuts for Metal Plastic

Description: 1. Materials: These rivet nuts are made of zinc plated carbon steel material with high strength good rust resistance corrosion resistance and oxidation resistance. 2. Features: Rivet nuts are designed to solve the problem of material that... more

#10-32 x 1/2 Zinc Phillips Flat Head Machine Screws (50 pcs.)

Diameter: #10 Length: 1/2 Material: Steel Finish: Zinc Head Style: Flat (Phillips) Thread Size: 32 (Fine) Thread Length: Full Type: Machine Screw Box of 50. A machine screw also called a stove bolt is generally a smaller fastener threaded the entire... more

#6-32 x 4 Zinc Phillips Flat Head Machine Screws (50 pcs.)

Diameter: #6 Length: 4 Material: Steel Finish: Zinc Head Style: Flat (Phillips) Thread Size: 32 (Coarse) Thread Length: Full Type: Machine Screw Box of 50. A machine screw also called a stove bolt is generally a smaller fastener threaded the entire... more

Socket Flat Countersunk Head Cap Screw 3/8-16 x 2 1/2 Alloy Steel Zinc Hex Socket (Quantity: 50)

Thread: Coarse / Partial Thread / Alloy Steel / Zinc Recommended Hex Socket Allen Key Wrench: 7/32 Inch more

50 Qty 1/2 Zinc Plated USS Flat Washers (BCP343)

Package of 50 United States Standard premium washers Inside Diameter 9/16 Outside Diameter 1.39 Thickness 3/32 Zinc plated for corrosion resistance These general use flat washers are positioned under the head of a bolt or nut in order to provide a... more

#10 x 1-3/4 Zinc Square Drive Flat Head Wood Screws WSFS-338 (50 pcs.)

Diameter: #10 Length: 1-3/4 Material: Steel Finish: Zinc Head Style: Flat (Square) Point Type: Sharp Drill Size: 3/32 Hole Thread Length: Partial Type: Wood Screw Box of 50. A wood screw generally has an unthreaded shank below the head. It is designed... more

10-32 x 1 1/2 Machine Screws / Unslotted / Hex / Steel / Zinc Plating (Quantity: 50 pcs)

Thread Diameter - Pitch: #10-32 Length: 1 1/2 Has six flat sides and a flat bearing surface. Preferred in high volume assembly where pneumatic equipment is used to drive the screw. more

#6-32 x 1/2 Zinc Plated Steel Coarse Thread Phillips Flat Head Machine Screws

Box of 50. A machine screw also called a stove bolt is generally a smaller fastener threaded the entire length of its shank. Machine screws are used in fastening nearly all types of hard materials. Especially useful in metal-to-metal or where heavy... more

#8-32 x 1/2 Zinc Plated Steel Coarse Thread Phillips Flat Head Machine Screws

Box of 50. A machine screw also called a stove bolt is generally a smaller fastener threaded the entire length of its shank. Machine screws are used in fastening nearly all types of hard materials. Especially useful in metal-to-metal or where heavy... more

1/4 x 9/32 x 5/8 Zinc Plated Steel SAE Thick Washers (50 pcs.)

Diameter: 9/32 Diameter 2: 5/8 Thickness: 1/16 Material: Steel Finish: Yellow Zinc Thread Type: SAE Nominal Size: 1/4 Type: Flat Washer Box of 50. A flat washer is a thin usually round plate with a hole in the middle that is normally used to distribute... more

10-32 x 1 Machine Screws / Phillips / Oval Head / Steel / Zinc Plating (Quantity: 50 pcs)

Thread Diameter - Pitch: #10-32 Length: 1 The Oval Head features a countersunk head with a rounded top surface and a cone-shaped bearing surface of approximately 82 degrees. The Oval Head is preferred over a flat head in conical applications or when a... more

#6-32 x 1-1/2 Zinc Slotted Oval Head Switch Plate Screws (50 pcs.)

Diameter: #6 Length: 1-1/2 Material: Steel Finish: Zinc Head Style: Oval (Slotted) Point Type: Flat Thread Size: 32 (Coarse) Type: Switch Plate Screw Box of 50. A screw for mounting switch plates on to a wall. more

10-32 x 5/8 Machine Screws / Slotted / Truss Head / Steel / Zinc Plating (Quantity: 50 pcs)

Thread Diameter - Pitch: #10-32 Length: 5/8 The Truss Head as a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same nominal size. Weaker than pan or round heads but preferred in applications where... more

10-32 x 1/2 Machine Screws / Slotted / Truss Head / Steel / Zinc Plating (Quantity: 50 pcs)

Thread Diameter - Pitch: #10-32 Length: 1/2 The Truss Head as a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same nominal size. Weaker than pan or round heads but preferred in applications where... more

10-32 x 3/8 Machine Screws / Slotted / Truss Head / Steel / Zinc Plating (Quantity: 50 pcs)

Thread Diameter - Pitch: #10-32 Length: 3/8 The Truss Head as a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same nominal size. Weaker than pan or round heads but preferred in applications where... more

10-32 x 3/4 Machine Screws / Slotted / Truss Head / Steel / Zinc Plating (Quantity: 50 pcs)

Thread Diameter - Pitch: #10-32 Length: 3/4 The Truss Head as a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same nominal size. Weaker than pan or round heads but preferred in applications where... more

8-32 x 1 1/2 Machine Screws / Slotted / Truss Head / Steel / Zinc Plating (Quantity: 50 pcs)

Thread Diameter - Pitch: #8-32 Length: 1 1/2 The Truss Head as a low rounded top surface with a flat bearing surface greater in area than a round-head screw of the same nominal size. Weaker than pan or round heads but preferred in applications where... more